Reference KILO50V | MIRMIDON

KILO-50V VHF mobile antenna with spring

The MIRMIDON KILO-50V VHF mobile antenna is an antenna designed for operation in the VHF frequency band (136-174 MHz). Antenna Type: It is a 1/4 type antenna, which means that the length of the antenna is approximately a quarter of the wavelength of

5,0

19,36€ VAT included 16,00€ excl. VAT

You've seen it cheaper Request a quote

available. Estimated delivery 2-5 days. available in shop Delivery price from 30,25€

Description MIRMIDON KILO50V

MIRMIDON KILO50V

The MIRMIDON KILO-50V VHF mobile antenna is an antenna designed for operation in the VHF frequency band (136-174 MHz).

Antenna Type: It is a 1/4 type antenna, which means that the length of the antenna is approximately a quarter of the wavelength of the frequency to which it is tuned.

Frequency Range: This antenna is designed to operate in a frequency range of 136 to 174 MHz, making it suitable for communications in the VHF band.

Maximum Power: It can handle a maximum power of up to 150 watts, making it suitable for radios and transmitters with significant power output.

Gain: It has a gain of 2.15 dBi, which means it concentrates the antenna radiation in a specific direction, which can improve the efficiency of signal transmission and reception.

Vertical Polarization: The antenna is vertically polarized, making it suitable for voice communications in the VHF band.

50 Ohms Impedance: The antenna has an impedance of 50 Ohms, which is common in radio communication systems.

Adjustable Tuning Type: This antenna is adjustable, allowing users to tune it for optimal performance at the desired frequency within the specified range.

Standing Wave Ratio (SWR): The antenna has an SWR of 1.1:2, which indicates a relatively good match between the impedance of the antenna and that of the transmission system, which minimizes reflection of energy and maximizes antenna efficiency.

Length: The length of the antenna is 530 mm, which is typical for a 1/4 wave VHF antenna.

Connector Type: The antenna has a connector that can be used as UHF Type or PL Type, providing flexibility for connection to different equipment and communication systems.

The MIRMIDON KILO-50V antenna is a high-power, high-performance VHF antenna designed for communications in the VHF frequency band. Its ability to handle 150 watts of power, along with a low SWR and 2.15 dBi gain, make it suitable for applications where efficient transmission and reception in the VHF band is required. Its adjustable length allows precise tuning to the desired frequency within the operating range.