MAT-10 Automatic Tuner HF 1,8-54 Mhz 30 watts Yaesu 817/818

MAT-10

The tuner can operate within the range of 1.8 MHz to 54MHz, at power levels of up to 30 watts. Tune dipoles, verticals, Yagis, or just about any coaxial antenna. Coupler compatible with YAESU FT817 FT818 equipment
The mAT-10 tuner is a very compact tuner for QRP devices like the FT-817/818. The maximum allowable transmit power is 30 W SSB PEP. The power supply is provided by two built-in LiIon batteries (type 10440), making the tuner a good companion for portable operations with the FT-817 or FT-818. A charger is included. Control is done via a supplied cable (8-pin MiniDIN) that connects to the ACC connector of the FT-817/818.
The operation is done via a button on the tuner. By direct coupling between the tuner and the transceiver, the so-called "One Touch Tune" is made possible: the tuner changes the operating mode to CW and reduces power, tunes and then automatically returns to the operating mode and transmission power previously configured. This makes the fitting process very comfortable. As with all mAT tuners, a tuning once found is stored in one of 16,000 memories, depending on the frequency.

• 1 MAT-10 coupler
• 1 charger 220v output 8.4v
• 2 rechargeable batteries included inside MAT-10
• 1 Cable for Yaesu MAT-CY

Characteristics

• Frequencies 1.8 to 54 MHz
• Valid for Yaseu
• Impedance 5 to 1500 ohms
• Maximum power 30 watts
• 2 x BNC Female coupler connector
• 8-pin coupler connector
• MAT-CY cable
• Metallic box
• Measures 13.8 x 6.1 x 2.3 cm
• Weight 260 gr.