ALINCO ERW-7 USB programming cable for Alinco equipment

ERW7USB

USB programming cable for almost all ALINCO scanners and radios that support PC clone function. There are three small LEDs on the USB connector that indicate the working status (green = ERW7C connected to PC / orange = data transmission / red = not used) Please note: Driver installation is required to use this cable (software and driver are not included supplied with this cable can be downloaded from www.alinco.com

The ERW-7C has a 3.5mm stereo jack to connect to the device. A 2.5mm stereo adapter is included.
To program the ALINCO DJ-V17 / V47 / V57 / V446 handheld radios you also need the EDS-10 adapter cable. To program the ALINCO DJ-G7 portable radio you also need the adapter cable EDS-14 or alternatively EDS-10.

Compatible with the following ALINCO scanners and transceivers
DJ-100,DJ-175,DJ-190,DJ-191,DJ-193,DJ-195,DJ-446,DJ 500,DJ-593,DJ-596,DJ-A10,DJ-A11,DJ A40, DJ-A41,DJ-A46,DJ-A446,DJ-VX-46,DJ-VX-50,DJ-C6E,DJ C7E,DJ S45,DJ V5,DJ-X-3
DJ-X-7,DJ-X-10,DJ-X-11,DJ-X-30,DJ X 2000,DR-135,DR-138,DR-235,DR-435,DR-438,DR- 620,DR-635,DR-735,DR-B185,DX-77,DX-R8,DXSR8,DX-SR9

Features

• Cable length 1 m
• Usb connector
• 3.5 x pin connector
• 2.5 x pin connector