MANSON KPS6402 Laboratory Power Supply 1-32V DC / 0-20A
KPS6402 MANSON Laboratory Power Supply 1-32V DC / 0-20A. The remotely controllable switching power supply of the KPS series. The waveform generator can simulate common test conditions for electronic devices. In addition to the built-in USB interface,
Make the first review372,68€ VAT included 308,00€ excl. VAT
Are you one of those who prefer not to wrap gifts? We do it for you!
With the Paper Gift Service, you will receive your product wrapped and ready to deliver to your recipient!
What if the recipient is you? Why not?
We all like to open a gift from time to time, so do not cut and hit the whim! We assure you that we will surround you with all the affection of the world.
This service is available for the following countries: España - Peninsula y Baleares, Canarias, Alemania, Bélgica, Eslovaquia, Eslovenia, Estonia, Francia, Grecia, Holanda, Irlanda, Italia, Letonia, Luxemburgo, Noruega, Polonia, Portugal, Reino Unido, República Checa, Suecia, Andorra, Austria, Bulgaria, Chipre, Dinamarca, Finlandia, Gibraltar, Hungría, Malta, Mónaco, Rumania, Suiza, Ceuta y Melilla, Gibraltar, Francia Corcega, Portugal - Azores y Madeira.
If in the purchase process you select a country, that are not specified in the list, we will delete automatically the service. Therefore you will not be charged anything. We are working to improve our services. So we will try, of course, to have this service in all countries.
Description MANSON KPS6402
Manson KPS-64202
KPS-6402 MANSON Laboratory Power Supply Adjustable voltage from 1-32V DC / adjustable amperage from 0-20A.
The remotely controllable switching power supply of the KPS series. The waveform generator can simulate common test conditions for electronic devices. In addition to the built-in USB interface, an optional Ethernet interface allows the user to configure, operate, and display the basic settings of the switched power supply via LAN or the Internet.
The KPS series uses SCPI (Standard Programmable Instrument Commands) syntax so that it can be easily integrated into electronic test systems. Two 4-digit displays offer a resolution of 10 mV or 10 mA. Three freely programmable presets for voltage and current can be saved and activated using the buttons on the front of the device. User-adjustable limit values for output current and voltage serve to protect connected loads from damage caused by overvoltage and overcurrent. The on / off button on the output and the locking button on the control elements allow safe and convenient operation. The possibility of analog remote control of the voltage, current and on / off of the output offers flexibility in the operation of the switching power supply. For laboratories, universities,
- 1 Power Source
- 1 Cable 220 type chuco
Characteristics
- Type Switching mode
- Input voltage 180 - 240VAC 50Hz ~
- Nominal output power 640W
- Output number 1
- Output voltage range 1-32VDC
- Output current range 0-20A
- Voltage load regulation = 50mV
- Current load regulation = 100mA
- Regulation voltage line = 20mV
- Current line regulation = 50mA
- Output ripple and noise = 5mV
- Voltage setting resolution 10mV
- Voltage meter digit and accuracy
- 4 digit ± LED display (0.2% 3 counts)
- Current setting resolution 10mA
- Digit and Accuracy of Current Meter
- 3 digit ± LED display (0.2% 3 counts)
- Additional Output Voltage N / A
- Auto range (with) No
- Constant current mode Yes
- Remote programming Yes
- USB connection type (optional LAN)
- Preset program 3 preset
- Internal program Yes
- Commend Set SCPI
- Optimal efficiency = 85%
- Cooling method Thermostatic control Fan from zero to maximum speed
- Protections Overload, Short circuit by constant current, Output tracking Over voltage,
- Floating earth overtemperature Yes
- CE approvals EMC: EN 55011, 55022 LVD: EN 60950, 61010
- Dimensions (W x H x D) 200x90x333mm
- Weight 3 kg