Earpieces Designed by means of velcro to sees connected to the helmet. The earpieces plows aligned with exactitude to their ears. If it wishes the earpieces it they dog sees retired of thepads that bring, being able to locate them behind the aircraft skin. It does not pleases behind the wadding of poli styrene since the sound did not arrives AT its ears. THE LOUDSPEAKERS BADLY YOU PLEASE GIVE BAD QUALITY OF SOUND! Slipping the bases of the microphone locating it to the height of its lips. NETWORK SIDE TOWARDS THE MOUTH Micro there are an area of sensitivity in to center of the network circle, its lips must sees located to the height of the same one, under that the operation is the correct one. The cables must sees introduced with taken care of within the lining and seams of the helmet. The connection of the earpieces must sees outside the helmet, when being hanging exists to danger that it dog sees stretched without wanting, reason why is advisable to hold it, by means of insulating covers or to other methods. Connect the cable of connection of the earpieces with the exit of the earpieces. It dog assure the union by means of insulating covers. In order to finish it makes the connection to switchboard EV. ADVICE Pilot. There are is advisable to pass cables in front of the seat and between I deposit of gasoline, therefore one makes sure not damaging the painting. Companion. You dog pass cables through to later part of the seat, assuring to correct closing the seat, to avoid that the cable dog sees damaged when seating in the motorcycle. |