RigExpert TI-8 CAT and Audio Interface with built-in soundcard

TI-8

RigExpert TI-8 CAT and Audio Interface with built-in soundcard. RigExpert TI-8 is a device to operate the phone, CW and digital modes using a personal computer. All in one through a single USB port! RigExpert TI-8 is a device to operate the phone, CW and digital modes using a personal computer. All in one through a single USB port!

RigExpert TI-8. Downloads Click to download the installation file.
Download the serial port verifier and see which program keeps the serial ports open.

Compatible cables not included:

TI-FT1K-S2 : Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D, FT DX 5000MP (using PATCH and AF OUT sockets)
TI-FT1K-S7 : Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D, FT DX 5000MP (using PACKET and AF OUT sockets)
TI-FT950: Yaesu FT-950, FT DX 1200, FT DX 3000
TI-FTMINI8: Yaesu FT-100, FT-817, FT-817ND, FT-857, FT-857D, FT-897, FT-897D
TI-IC13 : Icom IC-703, IC-706 (all models), IC-718, IC-7000 (using DIN-13 ACC socket), IC-7200, IC-7300, IC-7410, IC-9100
TI-TSMINI6 : Kenwood TS-480HX, TS-480SAT
TI-TS9 : Kenwood TS-570S, TS-570D, TS-590S, TS-2000, TS-2000X, TS-B2000
TI-IC8 : Icom IC-707, IC-275, IC-721, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC -738, IC-756 (all models), IC-761, IC-765, IC-775, IC-781, IC-7851, IC-970, IC-7600, IC-7700, IC-7800

Front panel:
1. ON. It turns on when the RigExpert TI-8 device is plugged in and the drivers are installed.
2. CW. Displays the transmissions in CW mode.
3. PTT. Indicates when the transceiver transmits.
4. CAT. Monitor the exchange of CAT data between the transceiver and the computer.
5. FSK. Lights when RigExpert TI-8 is sending FSK data.
6. Principal. Input level, audio of the main receiver.
7. Sub. Input level, audio sub-receiver.
8. TX. Output level, audio to the transceiver.

Rear panel:
9. TRANSCEIVER. 25-pin transceiver connector.
10. USB. Connect to the USB port of the computer.

features

• Transceiver audio interface
• CAT interface for various transceiver models
• FSK output
• PTT and CW output functions.
• Keyer CW
• Squelch entry
• Transceiver audio interface for operating digital modes, voice recording and playback
• CAT System (Computer Assisted Transceiver)
• FSK output
• PTT and CW outputs
• CW keyer (WinKey)
• Squelch entry
• Connection of the computer:
• USB connector (universal serial bus)
• Powered from the USB port (consumes 100 mA maximum)
• No external power supply is needed
• Transceiver connection:
• Single 25-pin connector for transceiver cable
• Several supported transceiver models
• Audio interface:
• Isolated from digital networks.
• The maximum input / output amplitude is 1V
• Input / output sampling rate: 8 to 48 kHz
• True 16 bit / ADC DAC used
• The volume levels are adjusted by the potentiometers on the front panel.
• CAT serial port:
• Baudrate: 300-115200 bauds
• Electrical compatibility: RS-232, CI-V, TTL or inverted TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
• PTT / CW outputs:
• PTT output: open collector and TTL level
• CW output: open collector
• The maximum current is 50 mA
• FSK output:
• Baudrate: 45-1200 baud
• Open collector output
• System Requirements:
• Desktop computer or laptop with USB compatible port 1/2/3
• Operating system Windows 2000 / XP / 2003 / Vista / 7/8/10 (32 or 64 bits)
• No USB drivers are required
• The RigExpert TI Manager software is provided free of charge
• Dimensions: 11 x 13 x 4 cm
• Weight: 0.3 kg
• Operating temperature: 0? 40 ° C
• GTIN Code: 4820185420150
• Warranty: 2 years