CON4262 N Male 90 Degree Elbow Connector for Soldering LMR400 PTFE

CON-4262

The CON4262 is a 90-degree angled N male connector designed for high frequency applications in telecommunication and radio frequency (RF) systems. This connector is optimized for LMR400 cables and features a solder connection system, providing a strong and reliable joint, especially suitable for installations where signal integrity is essential.

Made of nickel-plated brass, the CON4262 offers excellent corrosion resistance and durability under harsh conditions. Its central conductor, also made of brass but with a gold finish, ensures excellent conductivity and protection against oxidation, guaranteeing high-quality signal transfer.

This connector features a PTFE (Teflon) insulator, known for its dielectric properties and high temperature resistance, supporting an operating range of -65°C to +165°C. This material makes it ideal for high-performance RF applications, where thermal stability and low return loss are crucial.

With a VSWR of = 1.25, the CON4262 ensures minimal return loss, maximizing signal efficiency. Its 90-degree angled design allows for easy installation in tight spaces, making it an excellent choice for connections in areas where a straight connector might be difficult to handle.

This connector is rated for over 500 mating cycles and is compatible with LMR400 cables, which are commonly used in telecommunications installations, antenna systems, and transmitting base stations. Additionally, the silicone O-ring helps seal the connector against moisture and dust, providing additional protection in outdoor environments.

Valid for cable with an approximate diameter of 10.3 mm

Belden 9913: Offers low loss and is suitable for high frequencies, similar to LMR400, with excellent performance for antenna and RF transmission applications.

Times Microwave LMR400UF: Flexible version of the LMR400, ideal for installations requiring greater flexibility without sacrificing performance.

RG213: Although somewhat lossier than LMR400, it is a robust option for short and medium distance RF and antenna applications.

Commscope CNT-400: Comparable to LMR400 in loss and power handling capabilities, suitable for VHF/UHF and microwave frequency applications.

AIR802 CA400: Designed with low loss characteristics similar to LMR400 and suitable for long distance RF applications, especially in Wi-Fi and antenna systems.

RF Industries RFC400: Low-cost alternative to LMR400, with similar low loss properties and flexibility in RF applications.

Characteristics

• Connector Type: N male 90 degree angle.
• Cable Compatibility: Designed for LMR400 and RG8 cables.
• Connection Method: Solderless, using crimping.
• Impedance: 50 O.
• Frequency Range: 0 - 3 GHz.
• Supported Voltage: 500 V RMS.
• VSWR (straight): = 1.15 (DC to 3 GHz).
• VSWR (right angle): = 1.25 (DC to 3 GHz).
• Contact Resistance (Central): = 1 mO.
• Contact Resistance (Outside): = 1 mO.
• Insulation Resistance: = 5000 MO.
• Operating Temperature Range: -65°C to +165°C.
• Mechanical Durability: More than 500 connection and disconnection cycles.
• Body Material: Brass.
• Body Plating: Nickel.
• Center Conductor Material: Brass.
• Center Conductor Plating: Gold or Silver.
• Crimping Material: Copper Alloy.
• Crimp Material Plating: Nickel.
• O-Ring: Made of 6146 silastic for sealing against dust and moisture.
• Insulator: PTFE (Teflon), which provides excellent thermal resistance.
• Total Length Dimension: 41.7 mm.
• Side Dimension: 33.5 mm.
• Coupling Thread Diameter: 5/8 - 24 UNEF - 2B.
• Outer Diameter (Connection Section): 10.5 mm.