5,30€ VAT included
BIDATONG 690 Cable RG H-155 Length 5 mts + Wing base + FME H
BIDATONG 690. Made in Germany by the prestigious company BIDATONG. It is a complete antenna base equipped with 5 meters of H-155 very low loss cable with angled DV connector for connection to the PALOMILLA-type base. The H-155 cable, in addition to t
Make the first review30,98€ VAT included 25,60€ excl. VAT
Description BIDATONG BIDATONG690
BIDATON-690
BIDATONG 690. Made in Germany by the prestigious company BIDATONG. It is a complete antenna base equipped with 5 meters of H-155 very low loss cable with angled DV connector for connection to the PALOMILLA-type base. The H-155 cable, in addition to the DV connector for the base, mounts at its end an FME Female connector to be able to install and pass the cable through small spaces. By adapting the FME-PL adapter to the female FME connector, we will immediately have a PL connector ready to be connected to any station that uses a female PL (SO239) in its chassis. The PALOMILLA-type antenna base allows to connect practically any antenna on the market with this type of connection and the H-155 cable due to its characteristics of very low loss in high frequencies makes this complete base set fully recommended to install any type of antenna either CB, VHF, UHF, Dual-Band, professional or amateur. Its length of 5 meters makes it valid to install in large vehicles such as vans, trucks, buses, etc?
You may be interested in the FME to PL adapter connector not included see here

Coaxial Cable H155 low loss CU./low attenuation

FEATURES
Dielectric: PE injected gas
Mesh: tinned copper
Outer diameter ø 5 mm
Impedance: 50 Ohm.
Capacitance: 82 pF / m
Speed ratio: 0.81

- 1 Base Palomilla
- 5 meters cable H-155
- 1 Connector put on FME Female cable


Characteristics
- PALOMILLA base
- Cable RG-H-155 low loss
- Cable length 5 meters
- Female FME connector
- DV Base Connector
- PALOMILLA BASE
- Frequencies HF-CB- VHF-UHF
- Screw wing nut format
- DV27 connector
- Wing nut screw
- Material ABS Chromed brass
- Hole in sheet 12.5 mm
- Base diameter 43 mm
