We use own and extern cookies to offer you the best experience and service. If you surfing our website, you accept that we use them. You can change your cookies preferences at any time. More information about cookies policy
español frances ingles portugues
Always, the best prices
LOCURA DIGITAL
Radio communication leader
Call us [+34] 938.616.372. Hours Mon.-Thur. 9:00h - 14:00h & 15:00h - 18:30h. Fri. 9:00h - 14:00h.

AT100 PRO II Automatic Antenna Coupler from 1.8 to 54 Mhz with memories.

AT100 PRO II Automatic Antenna Coupler from 1.8 to 54 Mhz with memories. The AT100PRO II supports 125W in SSB and CW from 1.8 to 30 Mhz and 100W in the 6M band. You can use it with any type of antenna. It is okay if you use it with long wires and dro more Manufacturer: ldg Reference AT100PROII

available
397,88 incl. VAT
328,83€ w/o VAT
Delivery price from 30,25€
We're working in our new page, i'ts possible that you discover some mistakes. In that case, you can notify us clicking HERE.

LDG ELECTRONICS AT100

AT100PRO II AT100 PRO II Automatic Antenna Tuner from 1.8 to 54 Mhz with memories.

The AT100PRO supports 125W on SSB and CW from 1.8 to 30 Mhz and 100W on the 6M band. You can use it with any type of antenna. No problem if you use it with long wires and antennas with cable drop.

We want to emphasize that with this coupler you will have 2000 memories. Thanks to this feature, the adjustment data and used frequency are memorized and when using the coupler again at a used frequency, the adjustment is practically instantaneous.

AT100 PRO II Acoplador de Antena automático de 1.8 a 54 Mhz con memorias.

kit content
  • AT100PROII coupler

AT100 PRO II Acoplador de Antena automático de 1.8 a 54 Mhz con memorias.

Characteristics

  • Power range 5 to 250W(100W 50Mhz)
  • Adjustment range from 6 to 1000 Ohms 16 to 150 Ohms 6M
  • Frequency range from 1.8 to 54 Mhz
  • 4200 memories.
  • LED bar meter, output power and SWR
  • Adjustment time between 0.5 and 6 seconds (less than 0.1 second if it is a memory)
  • 2 ANTENNAS
  • Dimensions: 19.2 x 14.5 x 5.5cm
  • Microprocessor controlled
  • 11-16V
  • Consumption 500mA, during adjustment
  • Interface cables for ICOM IC2,Yaesu FT897/FT857

Accessories 1/1