We use own and extern cookies to offer you the best experience and service. If you surfing our website, you accept that we use them. You can change your cookies preferences at any time. More information about cookies policy
español frances ingles portugues
Always, the best prices
LOCURA DIGITAL
Radio communication leader
Call us [+34] 938.616.372. Hours Mon.-Thur. 9:00h - 14:00h & 15:00h - 18:30h. Fri. 9:00h - 15:00h.

ETRAC MINELAB MINELAB metal detector

It is the most advanced detector of Minelab, incorporates the Technology of Complete Spectrum of Band. Its stylish, sturdy and innovative design control panel, the screen and the lightweight and sturdy plate more Manufacturer: minelab Reference ETRACMINELAB

discontinued

We're working in our new page, i'ts possible that you discover some mistakes. In that case, you can notify us clicking HERE.

ETRAC MINELAB

ETRAC MINELAB MINELAB metal detector.
E Trac is Minelab's most advanced detector, as it incorporates Full Band Spectrum Technology (FBS). Its elegant, resistant and innovative design control panel, the screen and the light and robust plate, as well as the object identification options, make it a detector at a great distance from others. E Trac also includes a USB connection with which you can download and load the E Trac parameters, user modes and discrimination patterns from your computer.
E Trac will be able to detect the most valuable metal objects in a wide variety of mineralized terrains, including highly salinated ones, square sand and highly magnetic ones. The new functions allow you to customize the E Trac to your specific needs. This manual has been designed so that both the beginner and the most expert, get the most out of the E Trac. Minelab wishes you much success with your new E Trac! Operating frequencies are measured in kilohertz (kHz). Low frequency electromagnetic fields (eg 1.5kHz) penetrate deeper into the ground, but sensitivity to small objects is lower. High frequency electromagnetic changes (eg 65kHz) penetrate less into the ground, but are more sensitive to small objects. The E Trac, being able to operate with multiple frequencies, achieves a good depth and greater sensitivity. We give it to you with alkaline batteries, rechargeable battery, charger, Koss headphones, dish cover and electronics case.

E Trac podrá detectar los objetos de metal más valiosos en una gran variedad de terrenos mineralizados, incluidos los muy salinizados, la arena de la plaza y los áltamente magnéticos. Las nuevas funciones le permiten personalizar el E Trac a sus necesidades específicas. Este manual se ha diseñado para que, tanto el principiante como al más experto, saquen el máximo rendimiento del E Trac. ¡Minelab les desea mucho éxito con su nuevo E Trac! Las frecuencias operativas se miden en kiloherzios (kHz). Los campos electromagnéticos de baja frecuencia (p. ej. 1,5kHz) penetran en el terreno de forma más profunda, pero la sensibilidad a los objetos pequeños es más baja. Los cambios electromagnéticos de alta frecuencia (p.ej. 65kHz) penetran menos en el terreno, pero tienen mayor sensibilidad a los objetos pequeños. El E Trac, al poder funcionar con frecuencias múltiples, se consigue una buena profundidad y mayor sensibilidad.

Te lo damos con pilas alcalinas, batería recargable, cargador, auriculares Koss, funda del plato y funda de la electrónica.

  ETRAC MINELAB MINELAB detector de metales.

 

Features

 

E Trac Full Band Spectrum Technology (FBS) Most detectors on the market operate on one or two frequencies, ranging from 1 to 70 kilohertz (kHz). Although this technology has been used by the sector for years, Minelab found that a frequency that worked well in one area, if used in another, did not yield such good results. The mineralization of the ground, the scrap content and the size of the object influence the transmission efficiency of a single frequency. The FBS technology combines the multiple frequency technology of Minelab BBS (Broad Band Spectrum) with a new microprocessor to achieve: Greater depth of detection Greater sensitivity to a wide variety of objects Less interference to electromagnetic sources A more precise identification of the characteristics of the object The FBS circuit automatically transmits multiple frequencies simultaneously. Thanks to this greater frequency range, the signal received from the detector's plate is analyzed from a wide variety of responses, obtaining more information to better identify the object. Minelab's unique FBS technology means deeper, more sensitive and accurate detection. Discrimination (Disc.) Discrimination is the ability of the detector to identify the objects you are looking for (eg, coins and jewelry) and eliminate the signals you do not want the detector to identify (eg, nails). E Trac can be programmed to discriminate objects in different types of terrain. Ground Compensation E Trac uses sophisticated technology to eliminate ground mineralization. An advanced digital filter automatically eliminates the influence of terrain signals, so you only have to concentrate on detecting objects New functions LCD screen The E Trac screen measures 72mm x 48mm and has a higher resolution, compared to the models previous explorer The graphics are seen with greater clarity, being able to better identify the objects, thus facilitating detection. Ergonomic keyboard The design of the new keyboard allows one-hand access to all E Trac functions. Ergonomic handle The design of the new E Trac handle allows the detector to be handled comfortably, with a different feel, exclusive to E Trac. It allows greater maneuverability, with maximum control, both in fast and slow sweeps and greater comfort when it has to be detecting long periods of time. The display of the screen has been improved, as well as the ease of access to the keyboard, in order to better adjust all the parameters. New menu In addition to the new keyboard, with the new menu you can better access the different options, user modes and discrimination patterns. Auto Latch (Semi-Automatic Edition of Discrimination) E Trac has included the Auto Latch function, with which the Discrimination Pattern can be edited semiautomatically. In this edit mode, the box will automatically move to the coordinates of the iron content (FE) and conductivity (CO) of the detected object. From there, you can accept or reject that object in the discrimination pattern you use, using the Accept / Reject key. QuickMask QuickMask allows to adjust the rejection levels of Iron and Conductivity independently of the Discrimination Pattern, achieving a faster and easier way to edit the Patterns. User modes User modes allow you to choose the best parameters and discrimination patterns depending on the terrain conditions. The detector has four programmed modes, in addition to several memory positions to store your own. Through the menu you can easily access all modes and change when necessary. Recommended sensitivity When using Auto Sensitivity, the E Trac will indicate the sensitivity chosen and the one that the device "suggests", depending on the ground conditions. E Trac Xchange E Trac Xchange allows you to download and load the detector configuration and Discrimination Patterns through a USB port. This feature has been designed so that you can quickly configure the E Trac to specific detection environments, or the objects you prefer to search. Technical Specifications: Full Band Spectrum Transmission (FBS). Simultaneous transmission frequency of 1.5-100kHz Dish 11 "Double D Audio output Internal speaker and headphones Liquid crystal display (LCD) 240 x 160 pixels (72mm x 48mm) Folded length: 1060mm (41.7") Mounted: 1380mm ( 54.3 ") Detector weight 1.6kg (3.53lbs) (without batteries and headphones) Weight of the platter (including protection) 522g (1.15lbs) / - 10g (0.02lbs) Operating temperature range 0 ° C to 50 ° C (32 ° F to 122 ° F) Operating humidity range Up to 90% Relative humidity at 40 ° C (104 ° F) Storage temperature range -30 ° C to 80 ° C (22 ° F to 176 ° F) Interval operating humidity Up to 98% relative humidity at 40 ° C (104 ° F) Type Nickel Metal Hydride (NiMH) Output voltage 9.6V Capacity 1600mAh Input (Load) 12V @ 100mA Charge time 18 hours Weight 255g Operating temperature 0 ° C 50 ° C (32 ° F 122 ° F) Storage temperature -30 ° C to 80 ° C (22 ° F to 176 ° F) Temperature range battery charge 0 ° C at 45 ° C (32 ° F to 113 ° F)

Caracteristicas

  • Tecnología del E Trac Espectro de Banda Completo (FBS) La mayoría de los detectores del mercado funcionan con una o dos frecuencias, que oscila entre 1 a 70 kiloherzios (kHz). Aunque esta tecnología ha sido utilizada por el sector durante años, Minelab descubrió que una frecuencia que funcionaba bien en una zona, si se utilizaba en otra no se obtenían tan buenos resultados. La mineralización del terreno, el contenido de chatarra y el tamaño del objeto influyen en la eficacia de transmisión de una sola frecuencia. La tecnología FBS combina la tecnología de frecuencia múltiple de Minelab BBS (Broad Band Spectrum) con un nuevo microprocesador para conseguir:  Mayor profundidad de detección  Mayor sensibilidad a una gran variedad de objetos  Menos interferencias a las fuentes electromagnéticas Una identificación más precisa de las características del objeto El circuito FBS transmite automáticamente múltiples frecuencias de forma simultánea. Gracias a esta mayor gama de frecuencias la señal recibida del plato del detector se analiza desde una gran varidad de respuestas, consiguiendo más información para identificar mejor el objeto. La tecnología FBS exclusiva de Minelab supone una detección más profunda, sensible y precisa. Discriminación (Disc.) La discriminación es la capacidad del detector de identificar los objetos que está buscando (p. ej. monedas y joyas) y eliminar las señales de los que no desea que el detector identifique (p. ej. clavos). E Trac se puede programar para discriminar objetos en diferentes tipos de terreno. Compensación del terreno E Trac utiliza una tecnología sofisticada para eliminar la mineralización del terreno. Un filtro digital avanzado elimina de forma automática la influencia de las señales del terreno, para que solo que se tenga que concentrar en detectar objetos Nuevas funciones Pantalla LCD La pantalla del E Trac mide 72mm x 48mm y tiene una mayor resolución, comparada con los modelos anteriores de Explorer. Los gráficos se ven con mayor claridad, pudiendo identificar mejor los objetos, facilitando con ello la detección. Teclado ergonómico El diseño del nuevo teclado permite acceder con una sola mano a todas las funciones del E Trac. Empuñadura ergonómica El diseño de la nueva empuñadura del E Trac permite manejar el detector de forma cómoda, con una sensación diferente, exclusiva de E Trac. Permite una mayor capacidad de maniobra, con máximo control, tanto en las barridas rápidas como lentas y mayor comodidad cuando tiene que estar detectando largos períodos de tiempo. La visualización de la pantalla se ha mejorado, así como la facilidad de acceso al teclado, para poder ajustar mejor todos los parámetros. Nuevo menú Además del nuevo teclado, con el nuevo menú se puede acceder mejor a las distintas opciones, modos de usuario y patrones de discriminación. Auto Latch (Edición semiautomática de la discriminación) E Trac ha incluido la función Auto Latch, con la que se puede edicar de forma semiautomática el Patrón de Discriminación. En este modo de edición, el recuadro se desplazará automáticamente a las coordenadas del contenido de hierro (FE) y conductividad (CO) del objeto detectado. A partir de ahí, puede aceptar o rechazar ese objeto en el patrón de discriminación que en uso, utilizando la tecla Aceptar/Rechazar. QuickMask QuickMask permite ajustar los niveles de rechazo de Hierro y Conductividad con independencia del Patrón de Discriminación, consiguiendo una forma más rápida y sencilla de editar los Patrones. Modos de usuario Los Modos de Usuario permiten elegir los mejores parámetros y patrones de discriminación dependiendo de las condiciones del terreno. El detector tiene cuatro modos programados, además de varias posiciones de memoria para poder guardar los propios. A través del menú se puede acceder fácilmente a todos los modos y cambiar cuando sea necesario. Sensibilidad recomendada Cuando utilice la Sensibilidad automática, el E Trac indicará la sensibilidad elegida y la que el aparato “sugiere”, dependiendo de las condiciones del terreno. E Trac Xchange E Trac Xchange le permite descargar y cargar la configuración del detector y Patrones de Discriminación a través de un puerto USB. Esta función se ha diseñado para que pueda configurar con rapidez el E Trac a entornos específicos de detección, o los objetos que prefiere buscar. Especificaciones Técnicas: Transmisión Espectro Completo de Banda (FBS). Frecuencia de transmisión simultánea de 1,5–100kHz Plato 11” Doble D Salida de audio Altavoz interno y auriculares Pantalla de cristal líquido (LCD) 240 x 160 pixels (72mm x 48mm) Longitud Plegado: 1060mm (41.7”) Montado: 1380mm (54.3”) Peso del detector 1,6kg (3.53lbs) (sin pilas ni auriculares) Peso del plato (incluida protección) 522g (1.15lbs) /– 10g (0.02lbs) Intervalo de temperature de funcionamiento 0 °C to 50 °C (32 °F to 122 °F) Intervalo de humedad de funcionamiento Hasta 90% humedad relativa a 40 °C (104°F) Intervalo temperatura en almacén –30 °C to 80 °C ( 22°F to 176°F) Intervalo de humedad de funcionamiento Hasta 98% humedad relativa a 40 °C (104°F) Tipo Nickel Metal Hydride (NiMH) Tensión de salida 9,6V Capacidad 1600mAh Entrada (Carga) 12V @ 100mA Tiempo de carga 18 horas Peso 255g Temperatura de funcionamiento 0 °C 50 °C (32°F 122°F) Temperatura almacén –30 °C a 80 °C ( 22°F to 176°F) Intervalo de temperatura carga batería 0 °C a 45 °C (32°F a 113°F)