We use own and extern cookies to offer you the best experience and service. If you surfing our website, you accept that we use them. You can change your cookies preferences at any time. More information
LOCURA DIGITAL
Radio communication leader
Call us [+34] 938.616.372. Hours from Monday to Friday from 9:00 to 14:00 and 15:30 to 18:30.
Call us [+34] 938.616.372. Hours from Monday to Friday from 9:00 to 14:00 and 15:30 to 18:30.

PRO AT100 automatic antenna coupler of 1.8 to 54 Mhz with memories.

PRO AT100 automatic antenna coupler of 1.8 to 54 Mhz with memories.

AT100PROII

Referencia: AT100PROII (VARIOS)

avalaible

285,56 incl. VAT

236,00€ w/o VAT

BUY NOW

We're working in our new page, i'ts possible that you discover some mistakes. In that case, you can notify us clicking HERE.

ref: AT100PRO II AT100 PRO II Automatic Antenna Coupler from 1.8 to 54 Mhz with memories.

The AT100PRO supports 125W in SSB and CW from 1.8 to 30 Mhz and 100W in the 6M band. You can use it with any type of antenna. No problem if you use it with long wires and antennas with cable drop.

El AT100PRO admite 125W en SSB y CW de 1.8 a 30 Mhz y 100W en la banda 6M. Puede utilizarlo con cualquier tipo de antena. No hay problema si lo utiliza con hilos largos y antenas con bajada de cable.We want to emphasize that with this coupler you will have 2000 memories. Thanks to this characteristic, the adjustment and frequency data used are memorized and when the coupler is used again at a used frequency, the adjustment is practically instantaneous

Queremos recalcarle que con este acoplador dispondrá de 2000 memorias. Gracias a esta caracteristica los datos de ajuste y frecuencia utilizados se memorizan y al utilizar el acoplador nuevamente en una frecuencia utilizada el ajuste es practicamente instantaneo


Measurements AT100 PRO II Antenna Coupler Rear view

Medidas AT100 PRO II Acoplador de Antena

at100 pro acoplador automatico antena

Vista posterior

at100 pro acoplador automatico antena


CHARACTERISTICS
CARACTERÍSTICAS

Power margin 5 to 250W (100W 50Mhz)
Adjustment range from 6 to 1000 Ohms 16 to 150 Ohms 6M

Frequency range from 1.8 to 54 Mhz 4200 memories

LED bar meter, output power and ROE

Adjustment time between 0.5 and 6 seconds (less than 0.1 second if it is a memory)

2 ANTENNAS

Dimensions: 19.2 x 14.5 x 5.5 cm

Controlled by Microprocessor

11 16 V

Consumption 500mA, during adjustment

Interface cables for ICOM IC2, Yaesu FT897 / FT857

11 16 V

Consumo 500mA, durante el ajuste

Cables interface para ICOM IC2,Yaesu FT897/FT857

Accessories