REPEATER VXR9000 YAESU VHF 146-174 MHz + DUPLEXER

VXR 9000

REPEATER YAESU VXR 9000 146,174 MHz VHF DUPLEXER

Delivered with the duplexer adjusted to the frequency required by the customer.
Repeater VERTEX STANDARD VXR 9000 allows communicate users distant and / or by the orographic characteristics of the land, mountains, valleys, tall buildings, industrial structures, basements etc., is not possible direct link with mobile or portable computers. In these cases YAESU / VERTEX has developed over years of experience repeater systems of high robustness in all weather conditions. With a repeater station can connect zones isolated to the reliability and control over the system provides us with a decentralized system of large operators. The VXR 9000 us provide years of perfect operation. Thanks to its chassis alloy allows use in continuously without overheating problems.

The VXR 9000 is a relay that can switch based mode with the touch of a button and incorporate a microphone, its design allows easy use as a base station or install 19-inch rack.
The VXR 9000 can grabarle up to 32 channels, selectable computer and has the function scanner for use together by one or more networks
The VXR 9000 has a 13.5 VDC battery input emergency so that if a fault occurs the main power in the 9000 VXR automatically switch to auxiliary input and incorporate an audible signal to alert the transmission problem.
We can also schedule other modes; in case of failure CC go to low power and emit the alarm signal, etc.
We can also "Resetar" distance the VXR 9000 utilzando the decodificadota function 2 adjustable tones.

Features

• Yaesu, Vertex, STANDAED,
• Repeater 174MHz VHF 146
• Synthesized channels 32 12.5 / 25 KHz software selectable
• RF output power: 25W adjustable May 10
• CTCSS / DCS
• Silencer preset internally
• Volume and Squelch accessible from front
• Antenna Connector Type "N"
• Numerical information channel in use
• 6 programmable front keys
• Support options secrafonía low or high security
• TOT, penalization, BCLO, BTLO
• Base mode or selectable repeater
• Input for battery backup
• Space inside duplexer
• Programmable by PC
• Entry optional line
• Data input port D SUB 25 pin
• Temperature: 30 ° C ~ 60 ° C
• Dimensions: 483x88x343 mm
• Weight: 9.7 Kg