We're working in our new page, i'ts possible that you discover some mistakes.
In that case, you can notify us
Z11PROII LDG automatic antenna coupler
The coupler Z11 was one of the most popular models of LDG. The new Z11-Pro is even better supported than 0.1 125W is ideal for use both QRP valid as standard equipment with a 100W.
EL Z11-Pro 3D has 8000 memories, where data are stored automatically adjustment and frequencies used, when using the coupler at a frequency where it has been used previously is virtually instantaneous adjustment.
EL Z11-Pro supports up to 125W SSB and CW from 1.8 to 54MHz, can be used with any type antenna, inverted V dipoles, yaguis, loop,
etc ... Can also be used with long wire antennas with parallel cable drop with optional LDG balun.
As the outstanding feature Z11-Pro can work with external power supply or internal batteries (optional), thanks to its low power consumption , can run for several years with 6 batteries R6 size AA, if weight is a factor with 3 R6 for 1 year or even several months with a single 9V battery.
0.1a Power Range 125W (100W 6M)
adjustment range 6-1000 Ohms
6M 16-150 Ohms
Frequency Range 1.8 to 54 Mhz
ROE and LED status
Adjustment time between 0.5 and 6 seconds
(less than 0.1 seconds if a memory)
Consumption 300mA, during adjustment (25 uA standby)
Manual in Castilian