Content of kit
Step 1. To clear the frontal of the transmitter
In order to clear the frontal of the transmitter we willhave to clear the screws stars segun indicates the manual
Step 2. To remove the adapter from the frontal
Once extraido the frontal, we must remove the adapter that it includes clearing the screw star that is in the center of the same one.
Step 3. To extract the cover for the connection of the adapter
Immediately afterwards we will extract the cover of the inferior part of the frontal later to connect the adapter
Step 4. To extract the later part of the frontal
We must extract the later part of the frontal clearing the 4 screws stars to be able to make the connection of the adapter
Step 5. To connect the adapter to the transmitter
So that the adapter works we must connect cables of the adapter to the frontal of the transmitter by the hollow that habra been despúes of step 3. The connection is due to make followingthe wiring diagram of the manual.
Step 6. To fix the adapter
Once made all the previous steps we will only have to fix the union of the adapter to the frontal by means of the screws stars extracted in step 3
Frontal Vista of adapter MEK-M10
Lateral Vista of the adapter of load MEK-M10