We use own and extern cookies to offer you the best experience and service. If you surfing our website, you accept that we use them. You can change your cookies preferences at any time. More information about cookies policy
español frances ingles portugues
Always, the best prices
LOCURA DIGITAL
Radio communication leader
Call us [+34] 938.616.372. Hours Mon.-Thur. 9:00h - 14:00h & 15:00h - 18:30h. Fri. 9:00h - 15:00h.
28/03/2024, 29/03/2024 & 01/04/2024 CLOSED

YAESU FT DX 5000 MP HF / 50 MHz 200 W transceiver. Yaesu Premium Class

YAESU FT DX 5000 MP HF / 50 MHz 200 W transceiver. Premium Class of Yaesu radios with 2 Independent Receivers plus many unique options and accessories. more Manufacturer: yaesu Reference FTDX5000MP

discontinued

Yaesu FTDX-5000 mp

The new Yaesu FTDX-5000 mp is part of the new premium range of HF equipment designed by Yaesu with two independent receivers and the necessary accessories to meet the requirements of the most demanding operators.

The FTDX-5000 has been built on the basis of the popular FTDX9000 transceiver and a notable representative of the traditional FT-1000 series provides up to 200 watts of power output in Single Sideband, OC and FM modes (50 watts with AM carrier ) Digital Signal Processing is used throughout the design, which offers the most advanced functional characteristics of the industry in both transmission and reception.

YAESU FTDX5000MP

Kit contents
  • Yaesu FTDX-5000 mp
  • SM-5000 Station Monitor
  • Keypad for remote control FH-2
  • Handheld microphone (MH-31B8) for Yaesu FTDX-5000 mp
  • Power cable for transmitter
  • Accessories and cables required for operation
  • Manual

YAESU FTDX5000MP

For exceptional protection against strong incoming signals near your station, Yaesu's exclusive Variable RF Filter (VRF) acts as a high-performance Preselector, ideal for multi-operator competitions. Because this filter is manually tuned, the operator can optimize sensitivity or signal suppression with the simple rotation of a knob.

YAESU FTDX5000MP

The superb features of the receiver derive from its direct relationship to the legendary FTDX900, FT-1000D and FT-1000MP transceivers. It is possible to select Interception Point Optimization in the VFO input section, as well as one to three levels of radio frequency attenuation in 6 dB steps. The IPO configuration allows direct feed to the first mixer (the VFO B has a single IPO regulation), with two receivers built into each FTDX-5000 transceiver. Both VFO 1 and VFO B receivers use filtering for digital signal processing known as DSP, in addition to incorporating many of the FTDX9000's functions, such as Variable Bandwidth, IF Shift, and Contour Tuning. Band of Paso. The transceiver also features a Digital Noise Reducer and Automatic Notch Filtering, along with a manually tuned IF Notch filter. The Secondary receiver, which is used to monitor the same band as the main receiver, is ideal for viewing both sides of a stack or keeping an eye on a DX station communicating with other stations by calling area. , for instance.

YAESU FTDX5000MP

In transmitter selection, Yaesu's exclusive Three-Band Parametric EQ allows you to precisely and flexibly adjust the waveform to complement your voice. The amplitude, the Center Frequency and the Bandwidth of the microphone can be adjusted independently for the spectrum of low, medium and high frequencies, being possible to define also the bandwidth of the transmitted signal.

YAESU FTDX5000MP

On the right side of the front panel are three special windows that display the VFO B frequency, in addition to the graphical representation of the Digital Signal Processor parameters for VFO A and VFO B. In Menu mode, these windows display programming parameters in order to facilitate their configuration.

YAESU FTDX5000MP

On the rear panel of the transceiver there are four antenna ports for TX and RX, as well as a port for a receiver-only collector. Assemblies on the front and rear panel are independently configured for lever input, connection to a direct key, or computer-driven tamper interface. The transceiver also includes a Digital Voice Recording system and a Memory for Morse Code messages.

YAESU FTDX5000MP

The Yaesu SM-5000 station monitor adds sophistication and new capabilities to the Yaesu FTDX-5000MP. Allows you to view a presentation of a segment of the band through the receiver's VFO A. The default bandwidth allows you to see the represented signals very clearly.

YAESU FTDX5000MP

The SM5000 features a stereo speaker system with exceptional sound quality.

YAESU FTDX5000MP

The front controls of the SM-5000 allow you to adjust the contrast, mute speakers. In addition, a support is incorporated to be able to fix the SM-5000 to your Yaesu FTDX-5000.

Features

  • 160-6 meters
  • Electronic Keyer
  • Variable RF Filter (160-10M)
  • Parametric Microphone Equalizer
  • Dual Receive In Band Function
  • Contest-ready Antenna Selection
  • Manual and Automatic Digital Notch
  • Electro-Luminescent Subdisplays
  • High Speed Automatic Antenna Tuner
  • DSP Noise Reduction

Accessories 1/1