ICOM IC VHF FM MOBILE 2200 144 MHz.

 59660
Discontinued product.
  • IC2200H
  • ICOM IC 2200H Robust construction, similar in appearance to its predecessor IC-2100H ? 5, 10, 25...

    More info


We're working in our new page, i'ts possible that you discover some mistakes.

In that case, you can notify us

clicking HERE..


IC 2200H

65W output power
144 MHz FM TRANSCEIVER

Your amplifier MOS-FET provides 65W stable power output. The aluminum in one piece helps keep the transceiver cool and provides a durable construction.

Optional digital unit, UT-115
The optional UT-115 allows digital modulation and demodulation of voice and data at 4.8 Kbps can store up to 6 call themselves indicative and 6 more from other stations or, instead of recording the indicative, you can record any message of up to 20 characters. You can make a call using one of its indicator or pre-recorded call CQ. The digital squelch allows you to select an incoming call by selecting your target. When connected to a GPS receiver external can exchange position information with other stations.


 
 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 

 
FEATURES

Offer FM, AM (Rx only)
Number of memory channels: 200 (+ 1 call channel and bandwidth limits + 6)
Antenna Connector: SO-239 (50 ohms)
Voltage: 13.8 VDC ± 15% (negative ground)
Frequency stability: ± 10 ppm. -10 ° C to +60 ° C
Current consumption:
Tx
(65 W): 15#C/font>
Rx (Standby): 0.8#C/font>
  (Max. audio): 1.0#C/font>
Usable Margin temperature: -10 ° C to +60 ° C +14 ° F to +140 ° F
Dimensions (projections not included): 140 (W) x 40 (H) x 146 (D) mm.
(5-1/2 x 1-9/16 x 5-3/4 in.)
Weight (approx.): 1.25 kg, 2.75 lbs.
ISSUER
Output Power (approx.): 65, 25, 10, 5 W (Selectable)
Maximum frequency deviation: ± 5.0 / ± 2.5 KHz (Wide / Narrow)
Spurious emissions: DB less than% u221270
Microphone connector: 8 pin modular (600 ohm)
RECEIVER
Reception System: Double-conversion superheterodyne
Intermediate frequencies: 1 st: 21.7 MHz, 2nd: 450 KHz
Receive Sensitivity (at 12dB SINAD): 0.13 microvolts typical
Squelch Sensitivity: 0.10 microvolts, typical (threshold)
Selectivity (Wide / Narrow) Less than 14 / 9 kHz at -60 dB
Exceeding 6 / 3 KHz at -6 dB
Often spurious and image rejection: Than 60 dBc, typical
Audio output power (at 13.8 V DC): Than 2.4 W (10% distortion with 8 ohms)
External speaker connector: 3.5 (d) mm. (1 / 8 "), 3-wire
 
Supplied accessories:

  • Remote control microphone HM-133V
  • Microphone hanger
  • Power cable, OPC-1132
  • Spare fuse
  • Mounting Kit car


OPTIONS

HM-133V REMOTE CONTROL MICROPHONE
Remote control microphone with keypad backlighting. Similar to the supply.

HM-118N HAND MICROPHONE
Regular microphone.

HM-118TN/TAN HAND MICROPHONE
DTMF microphone with backlit keyboard.

OPC-440/OPC-647 MICROPHONE EXTENSION CABLES
OPC-440: 5.0 m (16.4 ft), OPC-647: 2.5 m (8.2 ft)

OPC-589 ADAPTER CABLE MICROPHONE
Lets you connect a regular 8-pin microphone.

UT-108 DTMF DECODER UNIT
To decode DTMF tones and coded squelch operation.

UT-115 DIGITAL UNIT
Provides digital capacity for voice and data to 4.8 kbps (2.4 kbps voice + data 2.4 kbps).

CS-2200H + OPC-478/OPC-478U CLONING SOFTWARE + CABLE
For quick programming of memories, etc..

OPC-474 CLONING CABLE (between transceivers)
SP-10 EXTERNAL SPEAKER
OPC-441 SPEAKER EXTENSION CABLE, 5.0m (16.4ft)
OPC-1132/OPC-347 DC POWER CABLES
OPC-1132: 3.0 m (9.8 ft), OPC-347: 7.0 m (22.9 ft)
MB-17A MOUNTING BRACKET IN THE CAR