ICV80E ICOM VHF walkie single band of 144 MHZ

ICV80E ICOM walkie monobanda de VHF 144 MHZ 66418
Available product.
  • ICV80E
  • ICV80E ICOM VHF walkie single band of 144 MHZ loud and clear audio * 750MW BTL amplifier with speaker...

    More info

  • 135,00€
  • VAT not included

We're working in our new page, i'ts possible that you discover some mistakes.

In that case, you can notify us

clicking HERE..

ICV80E ICOM VHF walkie single band of 144 MHZ ICV80E ICOM VHF walkie single band of 144 MHZ
Loud and clear audio * 750MW BTL amplifier with large 36mm speaker
* Typical value with internal speaker
Powerful 5.5W output power
Protection against dust and water resistant, equivalent to IP54 classification
Battery Pack Ni-MH high capacity provides 13 hours of operating time
* Typical operation with Tx: Rx: Standby = 5:5:90
VOX Function
200 memory channels, 1 call channel and 6 scan edges
10 memory banks and bank link scanning
5-character alphanumeric display
Priority scan, programmed, memory, jumping, tone
16 DTMF autodial memories
Lock repeater and busy channel lockout
Encoder / decoder built-in CTCSS and DTCS
Timeout Timer
Automatic power saving
PC programming (option CS-V80)
Transceiver to transceiver cloning (optional)
Channel Spacing Wide / narrow




Included Accessories

Battery, BP-264

*

BC-192 Charger

*

Antenna

AC adapter, BC-147S

*

Belt Clip


VOX Function
It also meets the equivalent of MIL-STD-810-C,-D and-E.
Ingress Protection Standard: Dust and water% u2014 IP54 (Protection against dust and water proof)

FEATURES

Output power (at 7.2V) 5.5 W (high)
2.5 W (average)
0.5 W (low)
Spurious Emissions DB less than% u201360
Maximum frequency deviation ± 5.0 kHz / ± 2.5 kHz (Wide / Narrow)
External MIC 3-conductor 2.5 mm (diameter) mm (1 / 10% u2033) / 2.2 k% u03A9
Receiver
Sensitivity 0.14 microvolts typical (12dB SINAD)
Squelch Sensitivity 0.1 microvolts typical (humbral)
Selectivity 70dB/50dB typical (Wide / narrow)
Intermodulation 75dB typical
Spurious and image rejection 75dB (typical)

Audio output power

(10% distortion)

750MW (Internal speaker, charging 8% u03A9)
External speaker connector 3-conductor 3.5 mm (diameter) (1 / 8% u2033) / 8% u03A9

Transmitter
Output power (at 7.2V) 5.5 W (high)
2.5 W (average)
0.5 W (low)
Spurious Emissions DB less than% u201360
Maximum frequency deviation ± 5.0 kHz / ± 2.5 kHz (Wide / Narrow)
External MIC 3-conductor 2.5 mm (diameter) mm (1 / 10% u2033) / 2.2 k% u03A9
Receiver
Sensitivity 0.14 microvolts typical (12dB SINAD)
Squelch Sensitivity 0.1 microvolts typical (humbral)
Selectivity 70dB/50dB typical (Wide / narrow)
Intermodulation 75dB typical
Spurious and image rejection 75dB (typical)

Audio output power

(10% distortion)

750MW (Internal speaker, charging 8% u03A9)
External speaker connector 3-conductor 3.5 mm (diameter) (1 / 8% u2033) / 8% u03A9
Transmitter
Output power (at 7.2V) 5.5 W (high)
2.5 W (average)
0.5 W (low)
Spurious Emissions DB less than% u201360
Maximum frequency deviation ± 5.0 kHz / ± 2.5 kHz (Wide / Narrow)
External MIC 3-conductor 2.5 mm (diameter) mm (1 / 10% u2033) / 2.2 k% u03A9
Receiver
Sensitivity 0.14 microvolts typical (12dB SINAD)
Squelch Sensitivity 0.1 microvolts typical (humbral)
Selectivity 70dB/50dB typical (Wide / narrow)
Intermodulation 75dB typical
Spurious and image rejection 75dB (typical)

Audio output power

(10% distortion)

750MW (Internal speaker, charging 8% u03A9)
External speaker connector 3-conductor 3.5 mm (diameter) (1 / 8% u2033) / 8% u03A9
VOX Function
200 memory channels, 1 call channel and 6 scan edges
10 memory banks and bank link scanning
5-character alphanumeric display
Priority scan, programmed, memory, jumping, tone
16 DTMF autodial memories
Lock repeater and busy channel lockout
Encoder / decoder built-in CTCSS and DTCS
Timeout Timer
Automatic power saving
PC programming (option CS-V80)
Transceiver to transceiver cloning (optional)
Channel Spacing Wide / narrow

Accessories