We use own and extern cookies to offer you the best experience and service. If you surfing our website, you accept that we use them. You can change your cookies preferences at any time. More information
Radio communication leader
Call us [+34] 938.616.372. Hours from Monday to Friday from 9:00 to 14:00 and 15:30 to 18:30.
Call us [+34] 938.616.372. Hours from Monday to Friday from 9:00 to 14:00 and 15:30 to 18:30.

ICOM IC-9100 Transceiver HF / VHF / UHF

ICOM IC-9100 Transceiver HF / VHF / UHF


Referencia: IC9100


3.472,58 incl. VAT

2.869,90€ w/o VAT


We're working in our new page, i'ts possible that you discover some mistakes. In that case, you can notify us clicking HERE.

ICOM IC-9100 Transceiver HF / VHF / UHF
Double conversion superheterodyne (triple at 1.2 GHz)
Dual independent receiver
HF/50/144 MHz 100W and 75W on 430 MHz
RTTY demodulator and decoder.
Antenna coupler built HF/50 MHz.
Intercept point of +30 dBm third order
Floating point DSP and 32-bit AD / DA converters 24-bit.

HF to 1200MHz Mutli-band transceiver

The IC-9100 covers the entire HF/50 bands, 144, 430/440 fans in several ways. By installing the optional UX-9100 1200MHz band unit can be operated in the band 1200MHz immediately.

ICOM IC-9100 Transceiver HF / VHF / UHF
ICOM IC-9100 Transceiver HF / VHF / UHF

Dual independent receptor

The IC-9100 has two independent receivers in a radio and get two different bands simultaneously Additionally, the primary and secondary audio banda can be controlled with independent volume and mute buttons, and received audio can be heard separately when external speakers are connected.

ICOM IC-9100 Transceiver HF / VHF / UHF
ICOM IC-9100 Transceiver HF / VHF / UHF
The satellite mode The satellite mode

Mode is synchronized satellite uplink (transmit) and downlink (receive) frequencies, and tracks of the frequencies in the tuning step of the same. This function matches satellites both normal and reverse mode. Doppler effect compensation can be performed easily. satellite channels 20 alphanumeric memory, how to store frequencies and tone settings for quick setup.

ICOM IC-9100 Transceiver HF / VHF / UHF

ICOM IC-9100 Transceiver HF / VHF / UHF

ICOM IC-9100 Transceiver HF / VHF / UHF

Optional D-STAR DV (Digital Smart Technology for Amateur Radio)

The optional UT-121 provides D-STAR DV mode communications digital voice and low data rate. Linking D-STAR repeaters via the Internet allows you to communicate anywhere. Addition to 144MHz, and banda 430/440MH 1200MHz, D-STAR DV mode can be used in 28MHz and 50MHz band single mode.

D-STAR DR mode makes it easy for D-STAR repeater acess

GPS functions of the position (external GPS receiver can be connected via a data connector. Addition, the position data can be entered manually.)

One-touch reply function

Digital call sign squelch

Received call sign registry

Automatic display of messages received

First three IF filters (3/6/15kHz) for the banda HF/50MHz IC-9100

The IC-9100 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3 FL-431 kHz and 6 kHz FL-430). By changing the first IF filter width according to the mode operation, the desired signal is shielded from adjacent-band in the later stages. The first 3 kHz IF filter is especially effective in CW and SSB modes.

Antenna connectors

Two antenna connectors for HF and 50MHz bands, with an automatic antenna, and each of 144MHz, 1200MHz and 430/440MHz

are included in the IC-9100.
With optional UX-9100.

High frequency stability

High stability TCXO crystal oscillator provides ± 0.5 ppm of high frequency stability over a wide temperature range (0 ° C to +50 ° C). This allows a constant operation time in RTTY or SSTV.

HF/50MHz, 144MHz 100W, 75W 430/440MHz

The IC-9100 uses high power amplifiers and efficiency, the large heat sink, providing a stable output power, even over long periods of operation.

DSP features and functions HF/50MHz, 144MHz 100W, 75W 430/440MHz

DSP 32-bit floating point and 24-bit AD / DA converters

The heart of the IC-9100 is the proven combination of floating-point DSP 32-bit and 24 bit AD / DA converters. This powerful combination supports many digital processing features such as modulation / demodulation, IF filter, two PBT, AGC, noise blanker, noise reduction, manual and auto filters first class, speech compressor, RTTY demodulator / decoder functions


Other outstanding features

Built-in voice synthesizer announces operating frequency level, mode and S-meter

User programmable band edge beep (can be disabled)

VSC (Voice squelch control) function

AFC function (FM / DV mode)

RF speech compressor

Microphone equalizer and adjustable bandwidth

Two types of preamp HF/50MHz bands: Previous 1: Increase the low-level signal improving intermodulation characteristics, prior 2: High gain preamplifier

20dB attenuator built

CTCSS and DTCS encoder and decoder

Triple band stacking register

Quick split function and frequency lock function

RIT and% variable to ± 9.999kHz u0394Tx

Audio equalizer function

SSB / CW synchronous setting automatically changes the point of the carrier when switching between modes CW and LSB / USB

Setting the tone and display 1Hz

Program scan, memory scan, select memory channels, select the scanning mode and scanning Df

Automatic adjustment measures

Making data 9600bps

AH-4 control circuit

ICOM IC-9100 Transceiver HF / VHF / UHF