Walkie KENWOOD THF7E
MARKING A DIFFERENCE OUR PRICES ARE THE SAME ON THE INTERNET AS IN STORE.
Easy drive With the TH-F7, an easy, comfortable operation and above all a highly intuitive set of menus are prioritized. Thus, each operation becomes a simple thumb operation of the multi-scroll control without the need to divert attention from the screen. Unlike the TH-D7E controller, the TH-F7E controller is more similar to the philosophy of a joystick, so at no time is it necessary to separate the thumb from the controller, similar to the control key on some mobile phones. It also incorporates a keyboard with 16 ergonomically spaced and illuminated keys for operation in the absence of light.
Dual Band The TH-F7E has 2 bands: the main band or Band A and the sub-band or Band B. Although the main band covers the 2 m (144 MHz) and 70 cm (430 MHz) bands in FM mode , the sub-band or Band B receives signals between the following ranges: so that 2 signals can be received simultaneously even in the same band. In addition, an internal ferrite bar is incorporated into the chassis that acts as an antenna for broadcasting broadcast signals in AM. In fact, the transceiver automatically switches to this antenna when frequencies below 10 MHz are chosen in Sub Band B. In this way, you can be listening to a radio station on Band B, at the same time that a channel is used. standard on band A. When signals are being received on bands A and B simultaneously, the balance between both bands can be adjusted. So by the volume level you can distinguish which band is being received.
Display The LCD display can control the brightness and contrast, and gives detailed information about the current frequency (in double size in case of mono-band mode, for easier reading), memory channel information, current mode of work, output power (high-low-very low), scan status, key lock, function keys as well as an innovative multi-level battery status indicator.
Battery Another important innovation is the Lithium-Ion battery, allowing greater durability than Ni-Cd batteries. Likewise, it can be powered with 4 alkaline batteries if desired, by means of the BT-13 adapter. It is very interesting that it incorporates its own charging circuit, so the transceiver can be used while it is charging (DC to 13.8 V) through the supplied AC adapter, or through the cigarette lighter connector in case of traveling in car.
Memory Channels and Multiple Scan Other specifications to take into account are the 400 memory channels and the complete range of scan functions that it incorporates): The Scan Type allows you to scan a desired band or a specified frequency range; In memory mode it is possible to scan all memory channels that have recorded frequencies or only previously created scan channel groups (up to 8 scan groups of a maximum of 50 channels each). |