BARRISTER BRV6 KIT-1 Rearview camera for going back maneuvers and 7" M
BARRISTER BRV6 KIT-1 Rearview camera for going back maneuvers and 7" Monitor - BLACK CASE
The kit is composed by a 7-inch monitor that includes an outside colour camera. This camera is placed at the rear of the vehicle, allowing you to see what's behind at all times.
The VIDEO signal enters into the monitor by the connecting cable incorporated. The monitor can invert the image. The monitor includes a screen saver, protects from light, offering a clean and sharp image at all times.
Ideal for campers, caravans, trucks, vans, etc. To make going back maneuvers, parking, loading, security and surveillance of the vehicle, etc.
The kit is supplied with all the necessary accessories for its installation.
Continuous Vision Camera
Connecting the monitor to the camera through the connecting cables you will get the image at all times.
Video in: 2 channels
Sound System: NO
Screen size: 7 inches
Power Supply: 12V or 24V
Power consumption: 8,64W
Operation temperature: 10 ° C / 65 ° C
Resolution: 480 RGB x 234 dots
Video Format: PAL
Display Function: Mirror / Normal / Rotation
Certificates: CE / RoHs / FCC
Display Device: Color Monitor
Screen Size: 7 inches
Audio Output: 200MW
Connection terminals: (AV1, AV2)
Power consumption: about 8W
Dot Pitch: 0.107 ( H) 0.319 (V)
Resolution: 800 (H)
Vision angle: U: 15 / D: 35, R / L: 55
Contrast: 150: 1
Brightness: 300cd / m2.
Dimensions: Width 163mm Height 125mm Depth 30.5mm
Image Sensor: Color CCD
Input voltage: DC12V ± 15% (350rnA)
Lens: 2.9 3.6 mm (Board)
Scanning System: 2: 1
lnterlace Resolution: 500 TV lines
S / N ratio: ~ 48dB (AGC Off)
video signal output: 1.0Vp p 75 ohm
Gamma Characteristic: 0.45
Internal Synchronization: SyncSystem
Minimum Illumination: 0Lux (IR LED ON)
IR projection distance: 6 meters
Power consumption: 2W
Water resistance: IP66
Chassis Material: Metal
Weight of camara plus support: 380g
Operating temperature: -20ºC to 70ºC
DIAGRAM WITH POSSIBLE CONFIGURATIONS