USER S MANUAL MINI DV Thank you for purchasing Mini DV Mini DV has the unique, ultra-small and delicate design.It can be used in many recording situations. MINI DV brings more convenience, safety and funs to your daily life. Web camera for online video chat Low illumination, high resolution video recording Support 720 * 480 30 fps / s and 320 * 240 30fps / s High speed USB 2.0 interface Support TF card up to 16GB. Build-in rechargeable lithium high capicity bettery lasting for 70 min and standby time about sound trigger for 50 hours Flexible installation with clip and bracket Device Lithuim build-in rechargeable battery, please charge the device when it first time use, charge MINI DV use below ways: 1). Computer charging directly 2). DC 5V Charger charging, When charging, green light twinkling, and full of charge, stop twinkling green light Caution: When lower of battery, will enter protect mode device, device can not power on.please Chaging. 2.Power on and video recording Press Power button, yellow light on, after device initialization enter into standby mode. Press Record / Stop button, yellow indicate light on, red indicate light twinkling slowly. Start video recording device, The resolution for video file is 720 * 480, 29--30fps/s.Short press Record / Stop button again, video recording stopped and saved automatically. Then device in standby mode. If you want to continue video recording, press Record / Stop button once again. a. Please make sure T-flash ( Micro SD ) Card has been inserted, if not, it will be power off automatically after 30 seconds. b. The maximum capacity of T-flash card is 16GB. c. Saving file needs certain time, so please don% u2019t Operation button press continuously in order to avoid saving and generating unsmoothly incomplete file. d. When you make a video, please focus on the object and keep 50cm under sufficient illumination. Then the video will be right, natural color, clear and stable. 3. Sound Recording trigger Press Power button, yellow indicate light on, enter standby after device initialization mode.At this time, press MODE button sound control switch into video mode. Now yellow indicate light on, red indicate light twinkling quickly (means sound control device in standby mode). If the sound outside is up to 60 decibels, XQ-80 will enter video recording mode, now yellow light on, slowly twinkling red light (means sound control device in video recording mode). XQ-80 will automatically enter standby mode when the sound outside is lower than 60 decibel standing for 2 minutes.In standby mode, if the sound outside is up to 60 decibels, XQ-80 will enter video recording mode again. 4 There is a CD dirver with the product which contains a file named file synchronization time. Please copy it to TF card. XQ-80 when connected with computer, time will be displayed with computer synchronously. Build a text called TAG.TXT under root directory of card. Open TAG.TXT, synchronous write according to enclosure stricktly date. [date] need space with newline 2009/08/18
Everytime power on the machine system will check and analyze TAG.TXT, then set system time according to file time. After that the text will be deleted by system automatically. 5 In video recording mode or standby mode, press Power button for 3 seconds, indicate light off, power off device means. 6 Auto power off function MINI DV will save the video files and automatically power off occasions as below In video recording mode if lower battery recording device will save the files first, then power off. MINI DV When memory is full, after twinkling light indicate sevial times, device automatically save the video files, and power off. In standby mode no any operation in 45 seconds device will turn off by itself 7 In power off mode, standby mode or video recording mode, device can conect to computer directly, then can use device as USB disk, can copy, cut and paste, delete file. Connect device to computer, after few seconds will pop-up removable hard disk, network Lighton, sevious twinkling yellow light times and stop twinkling. a.When connect computer, if the machine can not be identified, or can not pop-up removable hard disk in 30 seconds, please insert it again. b.It is better to copy or cut video files into a computer hard disk then play. 8 PC-Camera function When the first time using PC-Camera function, please install the driver as guide. The driver named SPCA1528_V2220_M% u2026Setup.exe. After that there will be an icon on the desktop AMCAP. In power off or power on mode, use USB cable to connect computer, the mode is U disk mode. Then short press MODE button, at this moment it can be switched into camera mode PC. Then double click AMCAP icon can be used as PC camera. 9.Reset Inter a small stick into the reset hole, and device will be turn off. Caution: when the product was stop working for unknown reason, please reset the machine. Occasions please follow the state legislation and refrain from illegal use Update We will keep your product updated for better daily use, please resort to the RETAILOR for the information of the new version. Working temperature: working under the ordinary temperature that is comfortable for people
Working humidity: our product is not waterproof, so please keep it away from water.Camera: please use the camera under light source, the camera should never be Expod under the sun for protecting the optical parts. Please use the device in ample light, and dont let the camera face the intense light aviod The optical device light.Working hurt by powerful eviroment: please not use the product in dusty place, and clean the camera with tissus.
Waste treatment: Please pay attention to protect environment, not to throw the product optionally. In order to avoid explosion, please not throw product into fire. |