BASETURBO With 90º ball joint for Turbo 2000 Antenna

BASE-TURBO-2000

Special TURBO BASE with 90º folding ball joint for Sirio Turbo 2000 Antenna, base valid only for Turbo 2000 antenna base color Strong Blue

The assembly process is detailed below.
The Turbo base does not include the support or the connection cable shown in the following images.
Step 1 assembly. protect the base
We will protect the turbo base with the plastic rubber placing it in the lower part of the same base.
Step 2 assembly. Preparing the base connection
We will pass the cable that reaches us from the station to the support. Once this is done, we must pass the connector that will later go to the base through the hole that the support or hole in the vehicle's sheet metal has.
Step 3 assembly. Connecting the base to the support and cable
As can be seen in the image, we must connect the base as reported in step 2. This is necessary for the correct fastening of the base. In this way we achieve a perfect union saving vibrations and movements of the base.
Step 4 assembly. fix the union
Once we have made the correct fixation, we must join it with the corresponding screw.

Features

• Ball joint base for Turbo 2000 Antenna
• Base Color Strong Blue
• Impedance 50 ohms
• Maximum power 200 watts
• Hole diameter in plate or support 12.5 mm
• Type Coil copper wire
• Weight 140g